Optional hardware
A sensor for the spaces nothing else can see.
Most operators need coverage on surface lots and on street segments where a camera cannot go and a gate makes no sense. That is what this is for. If you already have hardware in the ground, the platform works without it.
- Accuracy
- 99.5%
- Per space, all weather
- Battery
- 10+ yr
- Single cell, no service
- Install
- < 5 min
- One person, per sensor
- Ingress
- IP68
- Submersion rated
01
Two variants, one detection stack
Sensor
LoRaWAN radio, up to 3 km to a gateway. Built for city scale and campus wide deployments where range and independent infrastructure matter.
Sensor Lite
Bluetooth LE for single lots and garages close to a base station. Same detection, roughly 60 percent lower cost per space.
Gateway
Cellular backhaul gateway for sites with no network. Also works with any third party LoRaWAN gateway you already run.
Installation
Core drill, drop, epoxy, commission from a phone. No trenching, no conduit, no power. Replacement is the same five minutes.
02
Full specification
Dual magnetometer detection with no lens, microphone, or plate reader. The device knows whether mass is present above it and nothing else, which is why it clears privacy review in weeks rather than quarters.
| Detection | Dual magnetometer |
| Accuracy | 99.5%+ |
| Response | Sub second |
| Radio | LoRaWAN / BLE |
| Range | Up to 3 km |
| Battery | 10+ yr / 7 yr Lite |
| Ingress | IP68 |
| Operating temp | -40 to +85 C |
| Dimensions | 95 x 45 mm |
| Weight | 185 g |
| Surfaces | Asphalt, concrete, pavers |
| Install time | Under 5 min |
03